Commercial Security Systems · California

Commercial Security Systems for California Enterprises

If each of your California locations runs on a different local vendor's setup, AT&I brings them into one AI-powered program your team can manage from wherever it sits. AT&I Systems delivers commercial security systems in California through our National Accounts program, the same way multi-site organizations across the country already rely on us to run their security programs.

BankUnited logoHCA Healthcare logoBrandsMart USA logoCity Parking logoMD Now Urgent Care logoAmerant Bank logoMutual of America logoU-Haul logoCostco logoLa Mesa RV logoHanwha Power logoVolta Global logoDaher logoWithers Worldwide logoBluebird Kids Health logoFEAM Aero logoHealth Care District of Palm Beach County logoEverlast logoModMed logoCano Health logoBankUnited logoHCA Healthcare logoBrandsMart USA logoCity Parking logoMD Now Urgent Care logoAmerant Bank logoMutual of America logoU-Haul logoCostco logoLa Mesa RV logoHanwha Power logoVolta Global logoDaher logoWithers Worldwide logoBluebird Kids Health logoFEAM Aero logoHealth Care District of Palm Beach County logoEverlast logoModMed logoCano Health logo

An Enterprise Security Integrator for Your California Locations


Taking on California sites often means inheriting whatever each one already has: cameras from one vendor, badges from another, and no easy way to compare the two locations side by side.

At AT&I, we are an AI-powered physical security and operational intelligence company, and we serve California through our National Accounts program. For enterprises running commercial security systems in California alongside sites in other states, we act as the program architect and single point of accountability. Your California locations follow the same engineering standard as the rest of your portfolio, and your team works with one partner instead of a new vendor in every city.

That accountability runs through every stage of a site's life:

  1. 1

    Design.

    Our centralized engineering team turns your program standard into a site-ready design for each California location, adjusted for the building and how it operates.

  2. 2

    Deploy.

    Our National Accounts team manages schedules and stakeholders, while qualified regional partners carry out installation to AT&I's defined requirements.

  3. 3

    Support.

    Service requests and program changes route back through centralized support, so each site stays tied to the enterprise program long after go-live.

Los Angeles is one of AT&I's national presence locations, alongside Chicago, Dallas, and New York City, and every California site stays connected to our Florida headquarters through the National Accounts program.

Operational Intelligence for California's Core Industries


If you are responsible for security in California, you rarely oversee one kind of building. The same program may need to cover a corporate campus and a distribution center, and each asks something different of it.

Employee badging into a corporate office

Technology and Corporate Campuses

Bay Area campuses often span several buildings, with employees, contractors, and visitors moving between them all day. Connecting access control with visitor registration lets your team see who is on site and apply one badge policy across every building.

Security camera installation in a retail store

Multi-Site Retail

Cal/OSHA names retail robbery as an example of workplace violence committed by outsiders, and lists the exchange of money among the risk factors employers should assess. For a store network that stretches across the state, that assessment happens store by store, which is why consistency matters. We apply AI-powered video and access standards the same way throughout your retail portfolio, so your operations team can compare insights location by location.

Hospital lobby and clinical corridor

Healthcare

Hospitals and certain other health care settings in California follow a separate violence prevention regulation written for health care, so their programs answer to different requirements than a typical office. We design healthcare environments around clinical workflows, with restricted access for medication and records areas and video that helps your team investigate incidents without disrupting care.

Distribution warehouse

Manufacturing and Logistics

The Inland Empire is one of the largest distribution markets in the country, and many of its yards and docks run around the clock. For manufacturing and logistics operations, we connect gate and dock access with AI-powered video so your team can follow truck traffic and after-hours activity as it happens.

Connected Technologies Built Around Your California Operations


From headquarters, you need to see what is happening at a California site and change who can enter it, without waiting on a local vendor to log in. Each of these solutions is designed to give your team that reach.

Commercial Video Security Across California Sites

When an incident happens at one location, your investigators should not have to request footage from a separate system. We centralize video security so authorized teams can search activity across every California site from one place. AI analytics flag events such as loitering or a breached restricted area as they occur, which lets your team respond in the moment and spot patterns across locations.

Multi-Site Access Control for California Locations

Adding a new hire, revoking a contractor, or changing after-hours rules should happen once and reach every site. Our access control programs apply common credential policies across locations while leaving room for local roles and restricted areas. We work with cloud-managed and on-premises platforms, including Verkada and Avigilon, so your IT team can choose the architecture that fits its governance and data residency requirements.

Gate Systems for Yards, Campuses, and Parking

Vehicle entry is often where a site’s schedule and its security meet. We connect gate systems with credentials, license plate recognition, and video, so authorized vehicles keep moving while your team keeps a record of who entered and when.

Visitor Management at Every Location

Guests, vendors, and contractors arrive at California sites every day, and each location should handle them the same way. A consistent visitor management workflow lets your teams pre-register arrivals, issue temporary access, and keep a documented record across the portfolio. That record matters most when you need to know who was on site during an incident.

Visual Firearm Detection

Seconds matter when a firearm is visible on camera. We add visual firearm detection to compatible cameras already on site, and people verify each potential detection before an alert goes out, either through ZeroEyes’ monitoring team or by your own security operations center through Omnilert. Verified alerts can then trigger the response steps your organization has already defined.

Workplace Security Systems and California's Workplace Violence Prevention Law


If you employ people in California, you have almost certainly needed a written Workplace Violence Prevention Plan since July 1, 2024, when Labor Code section 6401.9 took effect. Across multiple sites, the harder question is whether each location can actually carry out what its plan says.

The law requires a plan, procedures, training, and records. It does not require any particular technology. The right systems make the plan workable at each site and give you documentation to support it.

Hazard assessments are stronger when they rest on evidence, and AI-powered video and access data show where after-hours entry, tailgating, or loitering actually happen at each site. When an emergency starts, access control can lock down entries and visual firearm detection can send verified alerts to designated responders. Mass communication then reaches staff across channels and locations with defined messages.

After an incident, searchable video tied to access events helps your team build a timeline for the investigation and the violent incident log. Over time, centralized reporting shows which California locations see repeat incidents, so you can direct plan revisions to the sites that need them.

The law also sets record retention: violent incident logs, hazard records, and investigation records must be kept for at least five years. Video retention is a separate decision, but it is worth setting deliberately for every site instead of inheriting whatever each recorder was configured to keep.

Cal/OSHA's Standards Board is required to adopt a more detailed general industry standard by December 31, 2026, which makes now a good time to confirm that each site's systems match its plan.

Ceiling-mounted security camera in an office

Camera Placement in California Workplaces

California also limits where workplace video can go. Labor Code section 435 prohibits employers from recording employees in restrooms, locker rooms, or rooms designated for changing clothes. The state's all-party consent rules for recording confidential conversations also make audio a decision to weigh carefully. Your legal and compliance teams should confirm how these requirements apply to your organization.

Areas Served Across California


Your sites may sit in a single metro or stretch the length of the state. Through our National Accounts program, we support enterprise locations across California's major business regions and coordinate them with the sites we support for you in other states.

Greater Los AngelesOrange CountyInland EmpireSan DiegoSan Francisco Bay AreaSilicon ValleySacramentoCentral Valley

Multi-Site Programs AT&I Already Runs


Before you bring a new partner to your COO, it is fair to ask whether that partner has run programs at this scale. Two of our multi-site success stories answer that directly.

BankUnited banking center

BankUnited

BankUnited's 55 banking centers across six states needed one approach to access instead of a different one at each branch. For more than 15 years, AT&I has served as its dedicated security partner, handling access control, video, and visitor management at every location. Branches across the network now follow the same access strategy.

View Success Story

MD Now Urgent Care clinic

MD Now Urgent Care

MD Now runs more than 100 clinics across Florida and Texas. AT&I brought them onto one standardized platform with centralized management, and stays on as the partner from deployment through daily operations.

View Success Story

What California Enterprises Ask AT&I


How does AT&I support California sites when it's headquartered in Florida?

Through our National Accounts program. Engineering and project management are centralized at our Florida headquarters, qualified regional partners handle installation to AT&I’s requirements, and regional teams deploy each site in coordinated phases. Your team keeps one point of accountability for every California location.

What does support look like after a California site goes live?

Service requests, system issues, and program changes route through AT&I’s centralized support, and our National Accounts team coordinates regional service from there. Every request stays tied to your enterprise program, so a fix at one site does not drift from the standard at the others.

Can AT&I standardize security across our California sites and our locations in other states?

Yes. We build a repeatable engineering framework for your organization, then adapt it to each site’s conditions without changing the core standard. Documented standards and centralized reporting keep California aligned with the rest of your portfolio as requirements change, and every site moves through the same design, deployment, and support stages.

Can AT&I connect our California sites to the security operations center we already run?

Yes. We centralize video so authorized teams can review activity at California sites from the same place they review your other locations. For visual firearm detection, your own security operations center can verify alerts through Omnilert, or ZeroEyes’ monitoring team can verify them for you.

Where can't cameras go in a California workplace?

Restrooms, locker rooms, and rooms designated for changing clothes. Labor Code section 435 prohibits employers from recording employees in those spaces without a court order. Audio needs separate care, since California generally requires consent from all parties to record a confidential conversation.

Who handles installation at our California locations?

Qualified regional partners carry out installation to AT&I’s defined engineering and program requirements, while our National Accounts team manages the schedule and the stakeholders. You get local execution held to the same engineering and program standards as your sites in other states, with one point of accountability for every location.

Can AT&I work with the cameras and access control already at our California sites?

Often, yes. Visual firearm detection, for example, can be added directly to compatible cameras you already have. For the rest, our design process starts by evaluating what each site runs today, so we can recommend what to keep, what to connect, and what to replace.

How long does a multi-site California rollout take?

It depends on how many sites you have, what each one runs today, and how you want to phase the work. Our regional teams deploy in coordinated phases, and your consultation is where we map that schedule against your priorities and budget cycles.

Plan Your California Security Program With AT&I


The first conversation is about your California footprint: where your locations are, what each one runs today, and what leadership needs to see across them. From there, our team outlines how AT&I would standardize and support those sites as part of one program.

After you send the form, a member of our National Accounts team will follow up to review your locations and set a time for the consultation.